You get commercial roofing jobs by going to the five buyers who hand them out: property and facility managers, general contractors, roof consultants and architects, public owners, and business owners you already know. For most residential roofers the easiest first door is service: leak repairs, inspections and maintenance programs for property managers. Those buildings then send you their re-roofs. In parallel, you get on general contractors’ bid lists and register on public bid portals, with a prequalification packet ready to send.
We read the top Google results for “how to get commercial roofing jobs” in November 2026. They come from roofing manufacturers (GAF, IKO), a trade site, a roofing school, a Roofr masterclass and a staffing firm writing for job seekers. They are good on the technical move into low-slope systems and on where bids are posted. None gives an owner a buyer-by-buyer plan, a prequalification checklist, a week-by-week outreach schedule or a way to measure whether commercial work is paying off. That is what this guide adds.
What changes when you add commercial work
Commercial roofing is a different sale, with different cash flow.
- Fewer, larger jobs. Ty Smith of Smith & Ramirez Roofing told GAF that “one commercial job could be the equivalent to 20 residential roofs or more.” That is good for revenue and hard on working capital.
- Price decides public tenders. On RoofersCoffeeShop, IKO quotes roofer Skujins saying that “for tenders, it’s almost entirely about price”, because every bidder must quote the same system, specification and warranty.
- Relationships decide private work. The same article notes that many commercial clients keep a short private list of roofers they call for quotes. Getting onto those lists is the job.
- Bonds and payment protection. For federal construction, FAR 28.102-1 requires performance and payment bonds on any contract over $150,000, and other payment protections between $35,000 and $150,000. Other owners set their own terms in each bid.
- Different products. In Roofing Contractor’s 2026 State of the Roofing Industry Report, commercial contractors earned the largest share of their revenue from single-ply roofing (28% on average), with TPO named most often as the chief product category.
The market is there. In the same report, 66% of commercial roofing contractors said their sales volume grew in 2025, and one Southern California contractor quoted in it said his company “had a ton of bidding opportunities in Southern California last year” and was “already getting big bidding opportunities from the public sector this year.”
The five buyers and how each one buys
| Buyer | How they buy | What they want from you | How to reach them |
|---|---|---|---|
| Property and facility managers | Short private list of roofers; repairs on call, re-roofs by quote | Fast response to leaks, clear reports with photos, budget numbers for next year | Direct outreach, local property management associations, referrals from tenants and other trades |
| General contractors | Invitation to bid on a project, by bid date | A complete, on-time number with clear inclusions and exclusions; safety record; insurance | Ask to be added to their bid list; send your prequalification packet |
| Roof consultants and architects | Write the specification other roofers bid against | Manufacturer certification, technical competence, clean past work | Lunch-and-learns, manufacturer reps, references |
| Public owners (schools, cities, federal) | Formal bids posted on portals; lowest qualified bid | Exact compliance with the bid documents, bonding, registration | SAM.gov for federal work; state and city procurement portals |
| Business owners you already know | Personal trust, often the owner deciding alone | Someone they already trust from their home roof | Your past residential customers who own a building |
Most new commercial roofers spread themselves across all five. Pick two to start: property managers for service work, and general contractors for project bids.
Start with service and maintenance
Repairs and maintenance are the easiest way into a building. The ticket is small enough that a property manager can try a new roofer without much risk, and each visit puts you on the roof of a building that will need replacing.
The margins are also attractive. On a Roofr Masterclass, commercial roofing veteran Bryan Mitchell, who said the commercial company he worked with grew to $70 million a year in roofing with $14 million in service, put commercial repair gross margins at about 60% to 75% and well set-up maintenance programs at about 80%. He also pointed out that manufacturer warranties require the owner to maintain the roof, which gives you a reason to talk to building owners about maintenance that is about their warranty, not your sale.
A simple service offer for property managers:
- Free roof condition report for one building. Photos, a moisture and drainage check, and a plain-language list of what needs doing now, next year and in five years.
- Leak response terms. A named contact and a stated response time you can actually keep.
- Annual or twice-yearly maintenance program. Inspection, drain and gutter cleaning, sealant and flashing touch-ups, and a written report the manager can send to the owner.
- Budget numbers. A replacement estimate the manager can put in next year’s capital plan.
The capital plan is where re-roofs come from. If you wrote the number in it, you are usually the first call.
Worked example: what a maintenance book is worth
| Example input | Value |
|---|---|
| Buildings on a maintenance program | 25 |
| Average annual maintenance fee | $1,800 |
| Annual maintenance revenue | 25 x $1,800 = $45,000 |
| Share of those buildings that re-roof in a given year | 5% |
| Average commercial re-roof | $150,000 |
| Re-roof revenue from the book each year | 25 x 0.05 x $150,000 = $187,500 |
All inputs are examples, not benchmarks. Put in your own prices and the age of the roofs you service. The formula holds: re-roof revenue from service = buildings serviced x yearly replacement rate x average re-roof value.
How to get on general contractors’ bid lists
General contractors need reliable roofing subcontractors, and they remember who sends complete numbers on time.
- List the GCs who build or renovate in your area. Look at building permits, jobsite signs and your local builders’ association.
- Call the chief estimator, not the front desk. Ask how they add a roofing subcontractor to their bid list and what prequalification they need.
- Send the prequalification packet the same day.
- Bid the first invitations even if they are small. IKO’s advice on RoofersCoffeeShop is to start with smaller jobs, which you are more likely to win and which cost less if something goes wrong.
- Follow up after every bid date. Ask whether the project was awarded and where your number landed. Our guide on how to follow up on an estimate has a commercial bid version of the cadence.
The prequalification packet
Have this ready as one PDF before you make the first call:
- Company overview, license numbers and years in business
- Certificate of insurance (general liability, workers’ compensation, auto, umbrella)
- Safety program summary and training records
- Bonding capacity letter from your surety, if you have one
- Manufacturer certifications and the systems you install
- Three to five commercial or multifamily project references with photos
- Equipment list and crew size
- Contact for bids and the email address bids should go to
Public bids
Public owners post their work. Federal opportunities are listed on SAM.gov, and states, cities, school districts and housing authorities run their own procurement portals. As an example, IKO’s article mentions that California’s Department of General Services posts open bids online. Public work is predictable and well documented, but you compete on price against everyone who meets the specification, and bonding requirements apply above the thresholds in each bid. Start with small public jobs, read every bid document twice, and speak to a surety and your counsel before your first bonded bid.
A 90-day outreach plan for property managers
Email to business addresses is still covered by email law: the FTC’s CAN-SPAM guide says the law makes no exception for business-to-business email, so include your postal address and an easy opt-out.
| Week | What to do |
|---|---|
| 1 to 2 | Build a list of 150 to 200 commercial and multifamily buildings in your service area with low-slope roofs, and find the property or facility manager for each |
| 3 | Email 1: introduce the free roof condition report, one line on who you are and one recent local job |
| 4 | Call the managers who opened or replied; email 2 with a sample condition report (redacted) |
| 5 | Email 3: a short note on what the manufacturer warranty asks owners to do on maintenance, with an offer to check theirs |
| 6 to 8 | Run the condition reports you booked; send each manager a report and a maintenance offer within a week |
| 9 to 10 | Follow up on every report; ask for a budget number to put in next year’s plan |
| 11 to 12 | Ask satisfied managers which other buildings or colleagues they would introduce you to |
| 13 | Review the numbers below and decide which list to work next quarter |
Use cold email follow-up principles on the email steps: each message adds something new.
What to measure
| Metric | Formula | Why it matters |
|---|---|---|
| Buildings contacted | Count per quarter | Whether outreach is happening |
| Condition reports booked | Reports booked / buildings contacted | Whether the offer is good |
| Maintenance agreements signed | Agreements / reports delivered | Whether the report earns trust |
| GC bid invitations received | Count per month | Whether you are on enough lists |
| Bid win rate | Bids won / bids submitted | Whether your pricing and scope are right |
| Re-roof pipeline from service | Sum of budget numbers given to managers | Future revenue you are first in line for |
| Days to payment | Paid date - invoice date, median | Cash flow, which commercial work strains |
Our glossary entry on win rate explains how to count bids so the number stays honest. For how commercial work fits into the bigger picture of a roofing business, see how to grow a roofing company.
Where to meet the commercial side of the industry
Trade shows are where manufacturers, distributors and commercial contractors meet. GAF calls the International Roofing Expo the largest industry show with the most learning opportunities; the 2027 edition runs February 16 to 18 in Las Vegas. Local roofing contractor associations are the other place to start, and members can tell you which bid lists and clients in your area are worth the effort.
If you want this run for you
Growigami puts AI agents on the work and our CMOs on the result. You pick a process (outbound, search, social, paid or your website), each starts at $1,999 a month with a 3-month minimum and 30 days’ notice, and you approve every message before it goes out. For commercial roofing, that is usually the outbound process aimed at property managers and general contractors. See how it works for roofers on our roofing page.
Frequently asked
How do you get commercial roofing jobs?
Commercial roofing work comes from five kinds of buyers: property and facility managers, general contractors, roof consultants and architects who write specifications, public owners who post bids, and business owners you already know. Most residential roofers break in through repairs, inspections and maintenance for property managers, then earn re-roof work from the same buildings, while also getting on general contractors' bid lists.
How do you find commercial roofing jobs to bid on?
Ask general contractors in your area to add you to their bid invitation lists, register on public bid portals such as SAM.gov for federal work and your state and city procurement sites, and ask your local roofing contractors association where members find work. Private building owners rarely post jobs, so for them you need direct outreach to property and facility managers.
How do I get into commercial roofing as a residential roofer?
Start with one low-slope system you can install well, get trained and certified by the manufacturer, and take small repair and maintenance jobs first. GAF suggests starting with an easy-to-learn system such as roof coatings, and IKO's advice on RoofersCoffeeShop is to bid smaller jobs first, where a new commercial roofer is more likely to win and a mistake costs less.
Do you need a bond for commercial roofing jobs?
For federal construction contracts, yes above a threshold: FAR 28.102-1 requires performance and payment bonds for any federal construction contract exceeding $150,000, and requires other payment protection between $35,000 and $150,000. State, city and private owners set their own bonding rules in each bid, so read the bid documents and talk to a surety and your counsel.
Is commercial roofing more profitable than residential?
It depends on the work. Commercial jobs are larger, so you sell fewer of them, but public tenders often go to the lowest qualified bid. Commercial roofing veteran Bryan Mitchell said on a Roofr Masterclass that commercial repairs run at about 60% to 75% gross margin and well set-up maintenance programs at about 80%, which is why many roofers build commercial work around service before re-roofs.





















