
Performance Max (PMax) is a Google Ads campaign type that runs one campaign across all of Google’s inventory, from Search and YouTube to Display, Discover, Gmail and Maps, and lets Google’s AI decide where to show each ad. Our verdict for B2B: it works only when it is told what a good lead is. Point it at raw form fills and it finds cheap form fills. Feed it qualified leads from your CRM, exclude your brand and add negative keywords, and it can find demand your Search campaigns miss. Below is why, the setup that changes the outcome, a decision table and a 90-day test plan.
The two top results for “performance max” are Google’s own pages, which explain the product and its benefits. Most of the rest are written for ecommerce, where a conversion is a sale with a price. In B2B a conversion is a form that may or may not become a customer months later, and that difference decides whether PMax helps or hurts.
What is Performance Max?
Google’s help page describes it as “a goal-based campaign type that allows you to access all Google Ads inventory” from a single campaign, “including YouTube, Display, Search, Discover, Gmail, and Maps.” You provide:
- A goal, such as leads or sales, and a budget.
- Assets: headlines, descriptions, images, logos and videos, grouped into asset groups.
- Audience signals: your customer lists, site visitors and the kinds of searches you expect.
- Optional search themes, which tell Google what queries you want to reach.
Google then decides which channel, which placement and which combination of assets each impression gets. Google says Performance Max delivers “on average over 18% more valuable conversions at a similar cost per action,” according to its own data. That is an average across Google’s advertisers, most of them not B2B, and it counts whatever each advertiser set as a conversion.
Why does Performance Max bring low-quality B2B leads?
Because it optimizes to the conversion you give it, and in most B2B accounts that conversion is a form fill. A form fill from a student researching a paper counts the same as one from a VP with budget. PMax has access to cheaper inventory than Search (display sites, apps, YouTube), so it can find many cheap form fills. In a Search Engine Journal guide to PMax for lead gen, one practitioner puts it this way: without better data, “it will seek to bring in as many submissions as possible.”
A 2022 Seer Interactive case shows the pattern. Against Discovery campaigns for one client, PMax drove 107% more leads at a 55% lower cost per lead in the platform’s numbers. Judged against the client’s back-end data, PMax leads converted at a significantly lower rate, and quality improved only after Seer added negative keywords and moved to value-based bidding. One client and an older version of the product, but it is the same warning the Search Engine Journal guide gives: the platform numbers can look good while the pipeline does not.
Three B2B features make it worse:
- Long sales cycles. If the deal closes in four months, the algorithm cannot learn from closed revenue in time. It learns from whatever happens early.
- Small volumes. A B2B account may create 20 qualified leads a month. Google’s lead-generation guidance (below) asks for at least 15 conversions in 30 days for the goal you bid on.
- Brand cannibalization. Without exclusions, PMax can show on searches for your own name and take credit for leads you would have had anyway.
How do you set up Performance Max for B2B lead quality?
1. Change what counts as a conversion
This matters more than any other setting. Google’s best practices for high-quality leads recommend:
- Choosing lead-generation goals such as “qualified lead” or “converted lead” rather than every form submission.
- Sending CRM outcomes back with offline conversion imports, and considering an upgrade to enhanced conversions for leads “for more accurate and durable measurement.”
- Uploading that data “regularly, ideally daily.”
- Picking a conversion action that “generated at least 15 conversions in the last 30 days at the account level,” and ideally one that “happens within 7 days of the ad interaction.”
For B2B, that usually means bidding on a marketing qualified lead or a meeting booked, not on a closed deal, because the closed deal arrives too late and too rarely. Pick the earliest stage that sales agrees is real.
2. Set the bidding to match
Google’s same page recommends value-based bidding (maximize conversion value, with or without a target ROAS) if you can assign different values to leads, and “target cost-per-acquisition bidding for qualified or converted leads” if you cannot. A simple value model works: a booked meeting from a company in your ideal size range is worth more than a whitepaper download from a company of five.
3. Exclude your brand
Add your company and product names as a brand exclusion in the PMax campaign, and keep a separate brand Search campaign. Google’s brand settings help says Performance Max brand exclusions apply to Search and Shopping inventory. This keeps PMax from claiming leads from people who already searched for you.
4. Add negative keywords
Google now lets you add negative keywords to Performance Max campaigns, typed in or from an existing negative keyword list. They “are applicable to Search and Shopping inventory only.” Start with the terms that bring the wrong people in every B2B account: jobs, careers, salary, free, course, certification, template, definition, and your competitors’ login pages.
5. Use search themes and signals that describe buyers
You can add up to 25 search themes per asset group, and Google says they carry “the same prioritization as your phrase match and broad match keywords” in Search campaigns. Exact-match keywords in Search still win when they match the query. Use search themes for the buying-intent phrases you want, and use your customer and opportunity lists as audience signals, not your newsletter list.
6. Control where clicks land
Final URL expansion lets Google send traffic to other pages on your site and build assets from them. For B2B, either turn it off or exclude the blog, careers and support sections, which attract readers and job seekers. Send PMax traffic to pages built for one offer.
7. Read the reports Google added
In an August 2025 update, Google said search terms reporting is now available “for all Performance Max campaigns and through the API,” along with full asset stats and a channel performance report. Check the search terms weekly and add negatives. Check the channel report to see how much spend goes to Display and YouTube, and whether those leads reach the qualified stage.
What should the asset group copy look like?
Google’s Performance Max specs ask for headlines of up to 30 characters (3 to 15, with at least one of 15 characters or fewer), long headlines of up to 90 characters (1 to 5), descriptions of up to 90 characters (2 to 5) and a business name of up to 25 characters.
Illustrative. Ledgerline (accounts payable software) is a fictional company.
| Asset | Example | Characters |
|---|---|---|
| Headline (short) | AP Automation | 13 |
| Headline | Approve Invoices in One Place | 29 |
| Headline | Built for Finance Teams of 5+ | 29 |
| Long headline | Accounts payable software that syncs with NetSuite and Sage Intacct | 67 |
| Description | Capture, code and approve supplier invoices. See pricing and a 3-minute product tour. | 85 |
Write the qualifier into the assets (“Finance Teams of 5+”), because PMax combines assets itself and you cannot assume the filtering line will appear. Our Google Ads examples show the same principles for eight Search campaign types, and our ad copy examples cover LinkedIn and Meta.
When should a B2B company use Performance Max?
| Situation | Use PMax? | Why |
|---|---|---|
| Search is not yet profitable | No | Fix Search first; it gives you more control over queries and ads while you learn |
| Fewer than 15 qualified conversions a month | Not yet | Below Google’s guidance for the goal; the algorithm optimizes to noise |
| CRM outcomes are not sent back to Google Ads | No | PMax will optimize to form fills |
| Qualified leads imported daily, 15+ a month, brand excluded | Test it | This is the setup it needs |
| You want reach on YouTube and Display with one budget | Test it | Its cross-channel reach is the real advantage |
| Very small, named account list (ABM) | No | LinkedIn or account-based display give tighter control |
How should you test Performance Max?
A 90-day plan that protects your Search budget:
- Weeks 1 to 2: measurement. Import the qualified-lead stage from your CRM daily. Confirm the numbers match your CRM for the last 30 days.
- Week 3: launch. One PMax campaign, one asset group per offer, brand excluded, negatives added, URL expansion off. Budget it as a test, typically 10 to 20% of your Google spend, and leave Search running.
- Weeks 4 to 8: weekly review. Search terms, channel split, and the share of PMax leads that reach the qualified stage compared with Search leads.
- Weeks 9 to 12: decide on pipeline. Compare cost per qualified lead and opportunities created, not cost per lead. Keep PMax if it adds qualified leads Search was not getting; cut it if it mostly re-labels brand and Search demand.
The test budget split is our working rule, not Google’s. The point is that PMax has to earn its share against Search on the same qualified-lead measure. Track cost per lead at the qualified stage, not at the form.
How Growigami runs Google Ads for B2B
Our paid ads service sets up the CRM feedback loop first, runs Search by campaign type, and tests Performance Max only when the account has the conversion data to support it. For a wider view of the platform, start with our glossary entry on Google Ads.
Frequently asked
What is Performance Max in Google Ads?
Performance Max (PMax) is a Google Ads campaign type that runs one campaign across all Google Ads inventory, including YouTube, Display, Search, Discover, Gmail and Maps. You give it a goal, a budget, text, images and videos, and audience signals; Google's AI decides where each ad shows, to whom and which assets to combine.
Is Performance Max good for B2B lead generation?
Only when it is told what a good lead is. If the conversion goal is any form fill, PMax tends to find the cheapest form fills, which in B2B often means students, job seekers and spam. If you import qualified leads or opportunities from your CRM, have at least 15 of them a month, and exclude your brand, it can find new demand that Search alone does not.
Can you add negative keywords to Performance Max?
Yes. Google now lets you add negative keywords to Performance Max campaigns, typed in or from an existing negative keyword list. They apply to Search and Shopping inventory only, so they do not stop your ads from showing on YouTube, Display, Discover or Gmail. Brand exclusions are a separate setting.
Will Performance Max take traffic from my brand campaign?
It can. Without a brand exclusion, PMax can serve on searches for your own company name, where you would have won the click anyway, and claim the conversion. Add your brand as a brand exclusion in the PMax campaign and keep a separate brand Search campaign. Google's brand exclusions apply to Search and Shopping inventory.
Performance Max or Search: which should a B2B company start with?
Search. You choose the keywords, write ads per intent and see exactly which queries bring qualified leads. Add PMax once Search is profitable, your CRM sends qualified leads back to Google Ads, and you have the budget to test it for at least two sales cycles' worth of lead data.
How many conversions does Performance Max need?
For lead generation goals, Google's guidance is to choose a conversion action that generated at least 15 conversions in the last 30 days at the account level, and ideally one that happens within 7 days of the ad interaction. Many B2B accounts have fewer qualified leads than that, which is a reason to wait or to use a broader, earlier qualified stage.



















